Gardena-based team
Based at 1247 W 130th St, Gardena, and open 24 hours every day.
Tile roofing Gardena has a distinctive pattern: the tile field often outlives the underlayment beneath it. A tile roof that leaks is therefore often not a failed tile roof at all — it is a failed underlayment with a sound tile field on top. This page covers tile repair and lift-and-relay, where the same tile is lifted, the underlayment and flashing are renewed, and the tile goes back.
Based at 1247 W 130th St, Gardena, and open 24 hours every day.
Review the approach and call for an estimate before deciding.
What is found on the roof is shown, not just described.
Follow-through from first call to final walkthrough.
Tile work is really two jobs — the visible tile and the hidden system beneath it — and the scope names both.
Cracked, slipped, or missing tiles are replaced individually, and the underlayment beneath each is checked, so one broken tile does not become a valley leak.
The tile field is lifted, the failed underlayment and flashing are replaced, and the same tile is relayed — keeping the roof's look while renewing the layer that actually waterproofs it.
Underlayment and flashing at valleys, walls, chimneys, and penetrations are renewed as part of any lift-and-relay, since these are the layers that failed.
Before any heavier covering is proposed, the structure is checked: structural components must support the covering system and installation loads, and a switch to heavier tile or metal on older framing needs that check.
Valleys, hips, and ridges are detailed with the relay, since tile valleys and ridge lines are where water and wind concentrate.
The relayed field, underlayment stages, and flashing are photographed, so the owner sees the hidden system the tile now covers.
Share what is happening and receive a clear next step from the local team.
Tile's long visible life is what misleads owners: a tile field can look sound for decades while the underlayment beneath it ages out, and the first sign is a leak that seems to come from nowhere. Lift-and-relay exists for exactly that gap — it keeps the tile, which is often the most expensive and most characterful part of the roof, and renews the underlayment and flashing that do the waterproofing. It is cheaper than a full tile replacement and more honest than patching a leak that underlayment failure will keep producing.
Gardena is an incorporated Los Angeles County South Bay city (incorporated 11 September 1930, 5.86 sq mi, 2020 population 61,027), with a median year built of 1964 and its largest building decade 1950–59 (28.4%). It is flat, at about 49 ft, with concentrated winter rain of about 13–14 inches a year, mostly November to March and near-zero June to September, plus Santa Ana wind season and strong sun and heat ageing. City of Gardena form BLD-020 (rev. 12/2/25) gives the design criteria as 100 mph wind, Exposure C, Seismic Design Category D, and Climate Zone 8. Permits are issued by the City of Gardena Building & Safety, 1700 W 162nd St — City counter (310) 217-9530 — not LADBS, which covers the City of Los Angeles only. The City of Gardena states that most residential, commercial, and industrial construction work, including re-roofs, requires a building permit, and that a reroof permit is an over-the-counter type that will not be processed without completed CF1R forms. Gardena fees are valuation-based under the 1 July 2026 schedule; no flat residential reroof fee exists, so check the current schedule or counter for the job's total. Related reading on chimney flashing is in the blog link at the bottom of this page.

Call to discuss an estimate. The tile field, valleys, flashing, and attic evidence are looked at, and repair versus lift-and-relay is discussed.
Individual tile repair is scoped where the failure is local; lift-and-relay is scoped where underlayment or flashing has failed across an area.
Tile is lifted and stacked, failed underlayment and flashing are replaced, and the bare deck and new layers are photographed.
The same tile is relayed over the new system, with valleys, hips, ridges, and flashing detailed as the field goes back.
The relayed roof is walked and photographed, with notes on tile care and what to watch at the first rains.

Lifted tile is handled and stacked so sound tile survives the relay — broken tile during handling defeats the point of relaying.
Tiles are lifted cleanly from their battens or fasteners without cracking neighbours, so the relay starts from a sound field.
Valley metal and flashing are formed on site to the valleys, walls, and chimneys of this roof.
New underlayment is laid and tile refastened to the system's method, so the relay is a system, not a restack.
Tile pitches are steep and tile is heavy underfoot; fall protection and careful footing are used on every tile job.
Lifted field, bare deck, new underlayment, flashing, and relayed field are photographed stage by stage.

The underlayment beneath has aged out. Lift-and-relay renews it and the flashing, and the same tile goes back — the leak stops without discarding a sound field.
Individual cracked tiles are replaced and the underlayment beneath each is checked. No relay is sold where a local repair is the failure's extent.
The framing is checked first: structural components must support the covering and installation loads. The covering choice follows that check, not the other way round.
Gardena is an incorporated Los Angeles County South Bay city (incorporated 11 September 1930, 5.86 sq mi, 2020 population 61,027), with a median year built of 1964 and its largest building decade 1950–59 (28.4%). It is flat, at about 49 ft, with concentrated winter rain of about 13–14 inches a year, mostly November to March and near-zero June to September, plus Santa Ana wind season and strong sun and heat ageing. Tile work here is usually on the older stock, where tile fields have outlived their underlayment and the relay decision matters more than the tile choice. City of Gardena form BLD-020 (rev. 12/2/25) gives the design criteria as 100 mph wind, Exposure C, Seismic Design Category D, and Climate Zone 8. Permits are issued by the City of Gardena Building & Safety, 1700 W 162nd St — City counter (310) 217-9530 — not LADBS, which covers the City of Los Angeles only.
Older frontage brings varied tile profiles and party-wall flashing into some tile scopes, alongside the usual valley and underlayment questions.
Tract homes mix tile and shingle fields, so a tile scope is set for the roof in front of you, not assumed from the street.
Detached homes and small multifamily buildings share the same tile pattern: field sound, underlayment aged, relay the system beneath.
Southern Gardena's older stock includes tile fields where underlayment age, not tile damage, is the usual diagnosis.
North Gardena tract homes mix pitched tile and low-slope sections, so a tile scope names the pitched field and its junction flashing.
Tile's visible life hides underlayment ageing, which is why a leaking tile roof is traced to the layer beneath before it is scoped.
A heavier covering on older framing needs a structural check; that check is part of the scope, not an afterthought.
Concentrated November-to-March rain tests tile valleys hardest, which is why valley renewal leads a relay scope.
A tile roof leaked though the tile looked sound, and the underlayment beneath had aged out across a slope.
The tile was lifted, underlayment and flashing renewed, and the same tile relayed — the leak stopped without a full tile replacement.
Maintenance: Check valleys and flashing after the first winter rains, and replace any cracked tile promptly.
Several tiles cracked after a storm, while the rest of the field and its underlayment stayed sound.
Cracked tiles were replaced individually and the underlayment beneath each checked, with no relay sold for a local failure.
Maintenance: Replace any cracked tile promptly; a broken tile left in place lets water under the field all winter.
An owner wanted a heavier tile on an older home, assuming the framing would carry it.
The framing was checked first and the covering choice followed that check, so the new roof rests on a structure verified to carry it.
Maintenance: Keep the framing check with the roof file; it governs any future covering change too.
Tile problems are usually underlayment, flashing, or single-tile problems — and each has its own scope.
Underlayment ages out while tile looks fine. Lift-and-relay renews it and keeps the sound tile.
Individual broken tiles let water under the field. Replacing them and checking beneath keeps a sound field sound.
Tile valleys and wall flashing fail before the field does. Renewing them tied into the relay stops the leak at its joint.
A heavier covering on unchecked older framing risks the structure. A framing check before the covering choice prevents it.

Tile work is verified by its stages: the lifted field, the bare deck, the new underlayment and flashing, and the relayed field — all photographed. Ask for those stage photos, and ask how the framing check was done where weight changed.

Full roof replacement plus seamless gutters; praised a detailed consultation, the company's own trained crew rather than subcontractors, daily project-manager presence, daily cleanup, and passing inspection.
First full roof replacement and new gutters; praised a step-by-step explanation and patience with insurance and financing questions, and clear communication.
Full roof replacement, gutters, gutter guard, and siding work in the reviewer's own account; praised colour renderings, scheduling, organisation, and communication, and options suited to Gardena sun and seasonal rain.
Leak leading to full replacement; praised a fast estimate and inspection, fair repair-versus-replacement advice, a 2-day install, and rooftop photos.
Reroof after poor workmanship and leaks on a new-home build; praised a thorough explanation, insurance-claim help, careful work on a steep roof with a special panel system, and cleanup.
Aggregate only for the other reviews: 4.9 stars across 42 reviews in total. Reviewers described pricing as fair; no dollar figure is claimed from reviews.
The tile field is lifted, the failed underlayment and flashing beneath it are replaced, and the same tile is relayed over the new system. It suits a roof whose tile is sound but whose underlayment has aged out — a common pattern on Gardena tile roofs.
Because the tile is not the waterproof layer — the underlayment and flashing beneath it are. When they age out, water gets under a sound-looking field, and the fix is under the tile, not on it.
Only after a framing check: structural components must support the covering system and installation loads. The covering choice follows that check, and a switch that the framing cannot carry is not recommended.
The City of Gardena states that re-roofs require a building permit, issued over the counter, with completed CF1R forms. Confirm the permit route for the specific relay scope at the City counter, 1700 W 162nd St, (310) 217-9530.
Not seeing your question? Our local team can help you understand urgency, scheduling and what to expect. Related reading: How to repair roof flashing around a chimney.
Ask the local teamRelated reading: How to repair roof flashing around a chimney. Gardena locations for this service: Moneta, South Gardena, North Gardena, Hollypark, Gardena Downtown.
Call us at +1 (562) 600-4041. We are open 24 hours every day. Tell us what the roof is doing and we will tell you what it needs, and arrange a time to look at it.